high on CHAIN-WRAPPED EARRING diy

10 Oct

October is National Breast Cancer Awareness Month and this week’s DIY is dedicated to this special cause. Even a small contribution towards raising awareness about breast cancer counts, so spread the word!

In this DIY, we will be making a beautiful pair of gold chain-wrapped pink earrings in a few simple steps. I was inspired by the chain trim Gia earrings from Nicole Romano (left) and the Swarovski crystal clip earrings by Etro (right). Let’s get started!

You only need a few things to DIY these simple earrings. I got them all from Michael’s; you can find them easily at any other craft/jewelry supply store. Here’s what you will need:

  • 2 Flat-Back Buttons (Mine are from the Galaxy Collection by Dress It Up)
  • 2 Gold Chains (Long enough to wrap around the button once + 4 cm to dangle)
  • 2 Gold Earring Posts (8mm or 10mm i.e. smaller than the buttons)
  • 2 Gold Earring Backs
  • E-6000 Glue
  • Toothpicks

Step 1: Add a drop of glue on the flat surface side of each of the earring posts.

Step 2: Press the earring post against the back of the button to glue them together. Instead of the center, I glued the post at one of the corners of the square button so when I wear the earring, it will sit lower on my ear lobe which will help the chain dangle better. If your button is round, you can pick any area that’s away from the center. Regardless of the button shape, make sure not to glue the post outside the button area. You want the post hidden behind the button. Let the glue dry completely for at least 30 minutes.

Step 3: On the corner of the button where you glued the post, mark the rim at that corner as point A and the rim on the exact opposite corner as point B. Carefully add glue around the rim of the button with a toothpick. Then take one of your gold chain pieces and fold it in half to find the exact middle of the chain. Glue the middle of the chain at point A on the button rim. If your button is round, choose any point on the button as A and the exact opposite point as B.

Step 4: Once the middle of the chain is secure at point A on the button rim, continue gluing on each side of  point A till you reach point B on the button rim. At point B, you should have extra chain on each side that dangles off the button. Each dangly piece on my earring is around 2 cm. Repeat Steps 3 & 4 to make the second earring and let the glue dry completely on both the earrings.

Then you have your own gold chain-wrapped sparkly earrings! They are super easy to make with any flat-back button/bead in any color, shape or design you like. Using the same steps but a different style of chain for the trim around the button will create a completely new pair of earrings. You can use these chic earrings to dress up any outfit!

I hope you had fun creating these chain-wrapped sparkly pink earrings! Also, I would love to hear what you think of my use of illustrations to display the finished earrings instead of modeling it myself. The original illustrations for the second and the last images are by the very talented Jessica Durrant. She has many more amazing works, so check them out! Until the next DIY, get your creative fix & stay HIGH on DIY!

Inspo images via Moda Operandi (left) and Net-A-Porter (right).  All other images by HIGH on DIY.

15 Comments on “high on CHAIN-WRAPPED EARRING diy”

  1. Dani July 4, 2014 at 11:23 AM #

    These earrings are super cute! I can’t wait to try them.

  2. Angela October 14, 2012 at 8:59 PM #

    what kind of glue do you use :)? They are so beautiful

    • HIGHonDIY October 16, 2012 at 9:53 PM #

      Angela, I used E-6000, a clear glue that’s holds very well! You can find it any craft store or maybe even hardware stores.

  3. kate October 13, 2012 at 1:20 PM #

    beautiful!! Love the pink and gold

    • HIGHonDIY October 16, 2012 at 9:52 PM #

      Thanks Kate!

  4. lici October 12, 2012 at 2:26 PM #

    I am a huge fan of your illustrations! Besides your lovely idea of these earrings… 🙂
    Very well done!!
    lg, lici

    • HIGHonDIY October 16, 2012 at 9:52 PM #

      Thanks lici! The illustrations are by another artist and I love them!

  5. Tanya October 10, 2012 at 4:22 PM #

    Those earrings are gorgeous and your illustrations are a fantastic idea! Different and individual, Love it.
    xx Tanya
    http://aciddreamsandsugarhighs.blogspot.com/

    • HIGHonDIY October 11, 2012 at 12:09 PM #

      Thanks Tanya! I am planning on making them in bunch of different colors 🙂

Trackbacks and Pingbacks

  1. Cool DIY Chain-Wrapped Earrings - Styleoholic - February 25, 2016

    […] Choose a button shape for these earrings (round, square, etc.) and start to create! You’ll need 2 flat-back buttons, 2 gold chains, 2 gold earring posts, 2 gold earring backs, glue and toothpicks. First add a drop of glue on the flat surface side of each of the earring posts. Then press the earring post against the back of the button to glue them together. Let the glue dry completely for at least 30 minutes. Now on the corner of the button where you glued the post, mark the rim at that corner as point A and the rim on the exact opposite corner as point B. The rest of the tutorial is here. […]

  2. Gifts for The Courageous Breast Cancer Survivor in Your Life | Joga With Jana - December 13, 2015

    […] adorable do-it-yourself pink-studded earrings are easy to assemble, and the finished product is a durable piece of jewelry she can wear with […]

  3. Gifts for The Courageous Breast Cancer Survivor in Your Life | Balance Die Centre - December 10, 2015

    […] adorable do-it-yourself pink-studded earrings are easy to assemble, and the finished product is a durable piece of jewelry she can wear with […]

  4. Gifts for The Courageous Breast Cancer Survivor in Your Life | Everyday Diet - October 21, 2015

    […] adorable do-it-yourself pink-studded earrings are easy to assemble, and the finished product is a durable piece of jewelry she can wear with […]

  5. 9 Uplifting Gifts for Breast Cancer Survivors | Dodo Burd - October 1, 2014

    […] DIY Chain-Wrapped Pink Earring […]

  6. DIY Fashion Recap 2012 - January 19, 2013

    […] Print Wrap Skirt || Chain Wrapped Pink Earring || Safety-Pin & Sequins […]

Add your comment to HIGHonDIY